The atmosphere and comfort in the house largely depend on the choice of building materials that were used in the decoration of the premises. This is especially acute in panel houses, where there are no plaster on the walls in apartments and they may not look attractive enough. Also, the properties of concrete impede the normal balance of humidity, which affects the common climate in the rooms and often leads to peeling off wallpaper. There are several options for solving this problem, and one of them is the skin of the walls with drywall. Its property is useful here if necessary to import multiple moisture, or give when decreasing air humidity. Moreover, plasterboard sheets serve as an excellent basis for wallpaper. Next is the approximate scheme of work with drywall.
Drywall sheets are directly glued to the wall, so you lose the minimum of space. It is important to work on strong and even walls that do not require special alignment. First you need to remove the wallpaper from the walls and primed their surface. The dimensions of some sheets of drywall up to 3 m long allow you to skin walls without extensions. You will need a gear spatula for applying an adhesive. It is important to monitor the density of the sheets of the sheet to the wall. The resulting quality of the sheathing is easily checked using a bar or a long level applied horizontally or vertically. In places of bulges, it is worthwhile to press more tightly to the basis. Between themselves, the sheets are connected in the end. You can start grinding joints and putty when the solution is already grasped. In this case, the thickness of the sheathing will be only 14-15 mm.
In the second version, drywall can be mounted on a crate from the rails, with dowels nailed to the wall. In this case, the thickness of the sheathing will be 28-29 mm, and in total, the room will shorten by 56-58 mm. It is worth considering that the use of rails with a thickness of less than 60 mm will not provide a sufficiently strong base. Reiki are located horizontally at a distance of 50-60 cm, with mandatory near the floor and ceiling. Dowels should be clogged into a wall with a segment of 1 m. Between the screws that are attached to the sheets, follow a step about 25 cm. It is possible to use ordinary metal profiles with better strength instead of wood, but also occupying more space.