In order to properly manufacture profiles from separately taken metal sheets, they usually use a machine that can bend the sheets, in other words, leafgia. Working with metal, you can use both electromechanical leaf sags and manual. Each species has its own pros and cons, which we will talk about in this article.
The principle of operation of all types of leaf bends is one, only, using manual leaf sags, the worker spends its own energy and strength, and the electromechanical device works due to power supply from the network.
The basic principle of action is that a sheet of metal is pressed by a special beam, and the musical beam is already bending the sheet on the directly specified angle.
Why is it worth choosing a manual leafgog
The main advantage of the manual device is its mobility. It is usually very light and does not require additional power, so it can be used in any room, regardless of it, there is electricity in it or not.
Another advantage of such a machine is that it can easily process even the thinnest sheets, while avoiding any damage to their surface.
Also, working with a metal workpiece, you do not need to worry about limiting the depth of the leaf feed in time, and thanks to the special design of modern devices, you can work on them even with one hand. And the material from which the device is made is steel that will work for a very long time and at the same time not to succumb to corrosion.
Characteristic features of manual leaf beam
These machines are very simple not only in the design, but also in use, so they will last a long time and will not cause special difficulties, and even allow maintaining full control over production.
A wide range of technical capabilities of this technique can guarantee their widespread use in various fields of human action.
In addition, with the help of manual leaf bends, you can easily create almost any profile that can suddenly be needed during construction work.
A manual leafgog can also work not only with small thin sheets of iron, but also create a maximum gib length, as well as work with the maximum possible thickness and angle of a metal profile.
Before buying, it is important to find out with which radius of bending this or that manual tool works.
You can use such a tool wherever a secondary metal processing is necessary. This is mainly internal construction, but also work with roofing materials and with external decoration of the premises are possible.