Theoretically, anyone can lay a tiled floor in a kitchen. But you should take into account the quality of work and the final result. Failure to properly seal the gaps between tiles can result in cracks along the edges.
Grout is also necessary to hold the tiles in place.
Many people say that if they entrusted the laying of tiles to professionals, it would look better and would be completed much faster, and in this case it is better to order repairs online https://livingvibes.ca. But a DIY tiling project will require a little more work than you expected.
How to prepare a floor for tiling
First, you should wash the floors and remove all debris. It is important that the surface is smooth, so all cracks and irregularities must be repaired. If there are damaged parts, take care of them. It goes without saying that you will need to remove the existing floor tiles first.
Depending on the type of floor, you will have to take appropriate steps to prepare the surface. For example, concrete floors require a primer, while wood floors require planks. If the floors are uneven, they need to be leveled using some kind of leveling mixture.
Find a starting point when preparing to lay floor tiles
It is from the center line that you should start laying the tiles. Then take the tile and place it in the center without any glue. This is called dry styling. Simply lay out a row of tiles, starting in the center of the room and working your way toward the walls. Be sure to mark the width of the tiles as you work. Most people assume that a room is perfectly square, and it’s designs like these that prove them wrong. This is why it may take several measurements to find the midpoint. In fact, you may find that the opposite walls are not the same size.
Let’s move on to additional dimensions
So, this step will teach you how to find the best place to place the tiles. The easiest way to do this is to use a level. It will help maintain an even first line. All you need to do is mark the width of the tile surface on it with a piece of chalk rather than aiming for the floor.
Don’t forget to take into account the width of the seam. Draw a straight line. When you reach the wall, measure the gap. This is the place for the narrowest tiles. If there is only a small portion of the tile left, you may have to move the center tile around until you find the perfect spot so the edges look good.